Toshiba E1-17063A - Manuel (Page 82)

3-31
3
4 Press to select “3.SET TIME” when you want to
set the time interval for the Confirmation Timer
function.
1 Press the key and press .
2 Press to select “12.CONFIRMATION
TIMER”.
• When you want to disable the Confirmation Timer function,
go to step 3.
• When you want to enable the Confirmation Timer function,
go to step 6.
3 Press to select “1.OFF” when you want to
disable the Confirmation Timer function.
• The display returns to the E-MAIL SETUP menu.
E-MAIL SETUP
01.PRINT TEXT BODY
02.BODY PAGE LIMIT
03.SEND MDN
E-MAIL SETUP
01.PRINT TEXT BODY
02.BODY PAGE LIMIT
03.SEND MDN
04.PRINT HEADER
05.PRINT E-MAIL ERROR
06.PRINT DSN
07.PRINT MDN
08.REQUEST DSN
09.E-MAIL TO FAX GATEWAY
10.GATEWAY PRINT
11.GATEWAY SECURITY
12.CONFIRMATION TIMER
13.MESSAGE SIZE LIMIT
CONFIRMATION TIMER
1.OFF
2.ON
3.SET TIME
CONFIRMATION TIMER
1.15MINS
2.30MINS
3.1HOUR
4.4HOURS
5.24HOURS
Confirmation Timer Setting
This sets whether or not the alert report is printed when the machine does not receive an MDN reply
from recipients in the time interval set. When the Internet Fax message that was sent from the machine
is not received successfully by recipients, an MDN response will not be received. When this is set to ON,
an alert report is printed informing you that the machine did not receive the MDN from the recipient.
Note
If the Incoming E-mail server of the recipient does not support the MDN, the machine prints the
alert report whether the recipient receives the document successfully or not. If you are not sure
that the recipients can reply the MDN request, it is recommended to select OFF.