Toshiba E1-17063A - Manuel (Page 57)

3
3-6
SETUP
5 Press the key.
• The display returns to the NETWORK menu.
• If you want to change another TCP/IP network setting,
change the setting before pressing the key.
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
6 Press to select “01.COMPLETE”. Save
the network settings and start initializing.
• After 2 seconds, the Operation Completed message is
displayed and returns to the INITIAL SETUP menu. It may
take few minutes to finish initializing the Network Interface
Card.
• If you want cancel the TCP/IP setting, press the key
before selecting “01.COMPLETE”.
NETWORK
Initializing
NETWORK
Operation completed
INITIAL SETUP
02.LANGUAGE
03.TERMINAL ID
04.NETWORK
1 Press the key and press .
2 Press to select “02.TCP/IP”.
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
3 Press to select “02.IP ADDRESS”.
4 Enter the IP address using the Dial Keypad and press
the key.
TCP/IP
01.BOOTP/DHCP
02.IP ADDRESS
03.SUBNET MASK
04.DEFAULT GATEWAY
05.HOST NAME
IP ADDRESS
0 00.000.000.000
IP Address Setting