Installing the optional motion detector board – Panasonic WJ-HD500A Manuel d'utilisation

Page 13

Advertising
background image

13

5. Place the Motion Detector Board on the Analog Board,

as shown below, and plug in the boards.

6. Fix both boards with the 3 supplied screws, as shown

below.

7. After installing the board, connect CN403 and the main

board, then secure them by tightening the screws
shown below.

Installing the Optional Motion
Detector Board

The Motion Detector Board WJ-HDB501 is installed exclu-
sively in the WJ-HD500A Disk Recorder.

1. Unplug the power cord from the WJ-HD500A Digital

Disk Recorder, or disconnect the plug from the AC out-
let.

2. Remove the top cover of the Disk Recorder by remov-

ing the 11 screws, as shown below.

3. Remove the 6 screws on the board, as shown below,

and disconnect the CN403.

4. Turn over the Main Board with the front side up.

Disk Recorder
WJ-HD500A

CN403

CN403

CN601

CN501

CN502

CN101

Main Board

Motion Detector
Board

Analog Board

Main Board

Advertising