Panasonic WJ-HD500A - Manuel (Page 100)

100
5. When the erase is completed, “DONE!” appears on the
lower-center in the menu.
6. Press the SETUP/ESC button for two seconds or more
to close the menu and return to the normal screen.
■ Manual Erase Function
1. Repeat the procedures until the ERASE menu is dis-
played on the monitor screen for auto erase.
2. Move the cursor to the ERASE DATA BEFORE parame-
ter in the menu by pressing the D or C button.
3. Select the month by pressing the + or - button, then
press the B button to select the date and year by
repeating the procedure.
4. Move the cursor to the EXECUTE parameter by press-
ing the D or C button.
Select “YES” by pressing the A or B button, then press
the
SET button to execute erase.
The recorded data before the specified date will be
erased from the disk.
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[SET]:EXECUTE YES NO
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[ESC]:STOP YES NO
NOW ERASING
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[ESC]:STOP YES NO
DONE!