Other operations, Setting the orbiter (orbiter), Side mask position (mask control) – Pioneer PDP-504CMX-S Manuel d'utilisation
Page 35
29
En
Other Operations
English
Other Operations
Setting the orbiter (ORBITER)
At set time intervals (about once every 8 minutes), this
function automatically changes the screen display
position by incremental amounts. The amount of screen
movement is 1 pixel horizontally or vertically.
When displaying a still image, setting [ORBITER] to [ON]
helps prevent the screen from being burnt with a lag
image.
÷ This function is not supported when using the POINT
ZOOM function, multiscreen function, or menu display.
Note
The [ORBITER] setting affects all input sources.
3 OFF
ON
2
1
Press the MENU button to display the menu
screen.
MENU
INPUT1
ENTER
SET
EXIT
MENU
PICTURE
SCREEN
SETUP
OPTION
:
0
:
0
:
0
:
0
:
0
:
0
CONTRAST
:
0
BRIGHTNESS
R.LEVEL
G.LEVEL
B.LEVEL
H.ENHANCE
V.ENHANCE
PICTURE RESET
2
Use the
2/3 buttons to select [OPTION].
MENU
INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER
OFF
:
MASK CONTROL
ON
:
AUTO SET UP MODE
INACTIVE
:
AUTO FUNCTION
OFF
:
AUDIO OUT
FIXED
STANDARD
LANGUAGE
ENGLISH
ENTER
SET
EXIT
MENU
PICTURE
SCREEN
SETUP
OPTION
3
Use the
5/∞ buttons to select [ORBITER].
MENU
INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER
OFF
:
MASK CONTROL
ON
:
AUTO SET UP MODE
INACTIVE
:
AUTO FUNCTION
OFF
:
AUDIO OUT
FIXED
STANDARD
LANGUAGE
ENGLISH
PICTURE
SCREEN
SETUP
OPTION
4
Press the SET button to activate the setting.
The factory default setting is [OFF].
Each time the button is pressed, the setting alternates
as follows:
5
When finished with the setting, press the MENU
button to return to the normal screen image.
Side mask position
(MASK CONTROL)
When screen size is set to [DOT BY DOT] or [4:3], or
when using multiscreen display, the position of the black
stripes on the side of the screen and the position of the
subscreen are changed slightly each time the power is
turned on, in order to alleviate burning of lag images on
the screen.
1
Press the MENU button to display the menu screen.
MENU
INPUT1
PICTURE
SCREEN
SETUP
OPTION
:
0
:
0
:
0
:
0
:
0
:
0
CONTRAST
:
0
BRIGHTNESS
R.LEVEL
G.LEVEL
B.LEVEL
H.ENHANCE
V.ENHANCE
PICTURE RESET
MENU
2/3
5/∞
SET
MENU
5/∞
SET
2/3
Main unit operating
panel
Remote control unit
MENU
2/3
5/∞
SET
MENU
5/∞
SET
2/3
Main unit operating
panel
Remote control unit