Pioneer PDP-504CMX-S - Manuel (Page 28)

22
En
Operation
English
1 Press the remote control unit’s POINT ZOOM
button.
66.0
22.1
R12 24
10
ZOOM P.ZOOM SCROLL
x 1.5
Zoom-Navi subscreen
Each time the POINT ZOOM button is pressed, the
zoom ratio alternates in the following order:
Notes
¶ During use of the POINT ZOOM function, the screen size
cannot be changed.
¶ When using the plasma display in a profit-making activity, or
when exhibiting images publicly, using the screen size function
to compress or stretch the image may result in infringement of
the copyrights of the image owners.
4 PARTIAL (*Supported only on PDP-504CMX)
The [PARTIAL] setting is available only during personal
computer input (1280 x 1024 input only).
The input signal and the screen maintain a dot to line ratio
of 1:1. Display is highly faithful to the source. However, in
order to maintain the 1:1 ratio, a portion of the display will
not appear on the screen.
Use the 5/∞ buttons to adjust the vertical position of the
video image on the screen.
5 ZOOM (*Supported only on PDP-434CMX)
The [ZOOM] setting is available only during personal
computer input (1280 x 1024 input only).
A portion of the display will not appear on the screen.
Use the 5/∞ buttons to adjust the vertical position of the
video image on the screen.
Moving the screen position
upward or downward
Press the 5/∞ buttons.
When playing a [PARTIAL] or [ZOOM] image (1280 x 1024
input only) from a computer, the vertical position of the
screen image can be adjusted. This adjusted position
cannot, however, be stored in memory.
Note
The image cannot be moved in the horizontal direction.
Operation
768 lines
1024 lines
768 lines
1024 lines
POINT
ZOOM
DISPLAY
5/∞/2/3
3 OFF 3 x 1.5 3 x 2 3 x 3
Enlarging one part of the screen
(POINT ZOOM)
This plasma display allows enlarging of the screen image
by ratios of [x 1.5], [x 2], and [x 3]. When enlarging the
screen, the
5/∞/2/3 buttons can be used to move the
enlarged viewing area around the screen.
¶ The range of zoom possible can be confirmed by viewing
the Zoom-Navi subscreen at the upper right of the main
screen. The Zoom-Navi subscreen is displayed for about
three seconds whenever the POINT ZOOM button, one
of the
5/∞/2/3 buttons, or DISPLAY button is pressed.