Pioneer X-MT2000 - Manuel (Page 25)

25
6 Using the Tuner
English
En
TUNER
FM/AM
DISPLAY
/CLOCK
1 2 3
4 5 6
7 8 9
10/0 >10 C
ENTER 4 ¢
REMOTE CONTROL UNIT
STANDBY
STANDBY/ON
BASS/TREBLE
CD SELECT OPEN/CLOSE
TUNING
! ⁄
› $
)
)
)
&
#*
1
2
3
FUNCTION VOLUME
DISPLAY/
CLOCK
TIMER
ENTER (DEMO)
ENTER
Listening to station presets
1 Press FM/AM TUNER (remote)
If the system was in standby, the power comes on and the display shows the current band
and frequency. Use the
FM / AM TUNER button to switch between the AM and FM bands.
• If you're using the front panel, turn the FUNCTION dial to select either AM or FM
radio.
2 Press DISPLAY/CLOCK.
3 Select a station preset to listen to.
You can use
4 or ¢ (remote or front panel) to step through the station presets
sequentially, or the number buttons (remote only) to select a station preset number
directly.
Saving station presets
You can store up to 24 station presets so that you always have easy access to your favorite
stations without having to tune in manually each time.
Note: If the power is disconnected for more than a few days, the station presets are lost.
1 Tune into the station you want to save as a preset.
The station can be in the AM or FM band.
• See page 18 for more on how to tune into radio stations.
2 Press ENTER.
3 Use the
4 and ¢ buttons to select a spare preset number.
Whatever was in the station preset will be overwritten with the new station once it's saved.
If you want to cancel here, press
C.
4 Press ENTER again to save the station as a preset.