Programming the track order, Programming a single disc playlist, 5 using the cd player english – Pioneer X-MT2000 Manuel d'utilisation
Page 19: 1select cd. press, Remote) or turn the
19
5 Using the CD Player
English
En
Programming the track order
This feature lets you make a playlist of up to 32 tracks. In the All play mode tracks can be
from any of the CDs loaded in the changer; in Single mode, tracks are from the selected
disc only.
The track order can be any you choose, and you can put tracks in the playlist more than
once if you like. The playlist applies only to discs in the player. Once you eject a disc the
playlist is lost.
Programming a single disc playlist
1
Select CD.
Press
CD
(remote) or turn the
FUNCTION
selector (front panel) to switch to CD mode.
2
Select SINGLE play mode.
Press
PLAY
MODE
to switch between
ALL
and
SINGLE
.
3
Press CD1/2/3 or CD SELECT 1/2/3 to select the disc you want,
then press
7 to stop playback.
4
Press PGM twice (remote only).
5
Select a track to add to the playlist.
Use the number buttons (remote only) to select a track.
• For track numbers 1 to 10, use the corresponding number button.
• Use the number buttons (remote only) to jump straight to that track number. For
track 10 use the
10/0 button; for tracks 11 and over, use the >10 button. For
example, press
>10, 6 for track 16; or >10, >10, 4 for track 24.
6
Add more tracks to the playlist.
Repeat step 5 to add up to 32 tracks.
7
To start playback press
6.
PGM
CD 3
CD 2
CD 1
CD
1
2
3
4
5
6
7
8
9
10/0
>10
PLAY MODE
4
¢
6
REMOTE CONTROL UNIT