Pioneer X-MT2000 - Manuel (Page 16)

16
4 Getting Started
En
Playing CDs
The 3-disc changer lets you play up to three CDs back-to-back (or at random, or in your
own programmed order), and you can even change discs while another one is still
playing.
The basic features are explained here; more features are covered in chapter 5 starting on
page 19.
1 Press
0 for disc 1 on the top panel to open disc tray 1.
The unit automatically switches on when you press any of the
0 (
OPEN / CLOSE )
buttons.
2 Load a CD.
Make sure that the label is face-up and that the CD is seated properly in the disc guide.
• Don't use an adaptor with 8cm CD singles as it may damage the player.
• Don’t load more than one disc at a time in a disc guide.
3 Press
0 for disc 1 to close disc tray 1.
4 Press CD SELECT 1 (top panel) or CD1 (remote) to start playing
disc 1.
The current disc indicator shows which disc is selected.
You can use the CD SELECT buttons ( CD 1 , CD 2 and CD 3 on the remote) to
automatically switch on the system from standby and start playing a CD if there’s one
loaded.
5 Adjust the volume and tone to your liking.
Use the volume control on the front panel, or the
VOLUME + and VOLUME – buttons
on the remote to adjust the volume.
To adjust the tone, first press BASS or TRE on the remote, then use the
4 and ¢
buttons to adjust. (On the top panel, press BASS / TREBLE to select either bass or treble,
then use the
1 / 4 and ¡ / ¢ buttons to adjust.)
6 To skip to a different track:
• Press
4 once to skip to the start of the current track. Further presses skip to
previous tracks.
• Press
¢ to skip to the next track. Further presses take you to subsequent tracks.
• Use the number buttons (remote only) to jump straight to that track number. For
track 10 use the 10/0 button; for tracks 11 and over, use the >10 button. For
example, press >10, 6 for track 16; or >10, >10, 4 for track 24.
7 For fast scanning:
• Press and hold
4 (remote) or 1 / 4 (top panel) for fast reverse scanning.
Release to resume normal playback.
• Press and hold
¢ (remote) or ¡ / ¢ (top panel) for fast forward scanning.
Release to resume normal playback.
8 To pause playback, press
6.
Press again to restart playback.
9 To stop playback, press
7.
BASS TRE
CD 1
1 2 3
4 5 6
7 8 9
10/0 >10
4 ¢
7
6
VOLUME
VOLUME
+
—
REMOTE CONTROL UNIT
STANDBY
STANDBY/ON
BASS/TREBLE
CD SELECT OPEN/CLOSE
TUNING
! ⁄
› $
)
)
)
&
#*
1
2
3