Pioneer DJM-2000 - Manuel (Page 23)

DRB1496-D
En 23
English
23 22
Types of BEAT EFFECT
DELAY 1
Original
(4 beats)
1/2 delay
(8 beats)
This function outputs a delay sound once according to the beat button’s fraction.
When 1/2 beat delay sound is added, 4 beats become 8 beats.
Beat buttons (parameter 1)
Use these to set the delay time from 1/8 to 4/1 with respect to 1
beat of BPM time.
TIME (parameter 2)
Use this to set the delay time.
1 to 4000 (ms)
LEVEL/ DEPTH (param-
eter 3) Use this to set the balance between the original sound and the
delay sound.
EFFECT FREQUENCY
(parameter 4) Use these to set the balance between the original sound and
the delay sound for the different bands.
ECHO 1 2
Input sound turned off
Time
Fade-out
1 beat
This function outputs increasingly attenuated delay sounds several times accord-
ing to the beat button’s fraction.
With 1/1 beat echoes, the delay sounds are faded out according to the track’s
tempo even after the input sound has been cut.
Beat buttons (parameter 1)
Use these to set the delay time from 1/8 to 4/1 with respect to 1
beat of BPM time.
TIME (parameter 2)
Use this to set the delay time.
1 to 4000 (ms)
LEVEL/ DEPTH (param-
eter 3) Use this to set the balance between the original sound and the
echo sound.
EFFECT FREQUENCY
(parameter 4) Use these to set the balance between the original sound and
the echo for the different bands.
MULTI TAP DELAY
1
MIN MAX
MIN MAX
EFFECT FREQUENCY
MIN MAX
1/8 beat
1/4 beat
1/1 beat Time
This function outputs up to 7 delay sounds in 1/8 units, according to the beat
button’s fraction.
The volume of the delay sound can be adjusted with the [EFFECT FREQUENCY]
controls.
The volume of the odd delay sounds is adjusted from [MIN] to the center posi-
tion, the volume of the even delay sounds is adjusted from the center position to
[MAX].
Beat buttons (parameter 1)
The effect time is set from 1/8 to 4/1 with respect to 1 beat of
BPM time.
TIME (parameter 2)
Use this to set the delay time.
10 to 4000 (ms)
LEVEL/ DEPTH (param-
eter 3) Use this to set the balance between the original sound and the
delay sound.
EFFECT FREQUENCY
(parameter 4)
This sets the volume of the delay sound for the different bands.
REVERB
1 2
Level
Direct sound
Early reflected sound
Reverberations
1%
100%
Time
This function adds a reverberation effect to the input sound.
Beat buttons (parameter 1) These set the degree of the reverb effect from 1 to 100 %.
TIME (parameter 2)
Use this to set the degree of the reverb effect.
1 to 100 (%)
LEVEL/ DEPTH (param-
eter 3) Sets the balance between the original sound and the effect
sound.
EFFECT FREQUENCY
(parameter 4) Use these to set the balance between the original sound and
the effect sound for the different bands.
ROLL 1 2
Effect turned on
Repeated
Original
1/1 roll
This function records the input sound at the point at which the [ON/ OFF] but-
ton is pressed and repeats the recorded sound according to the beat button’s
fraction.
Beat buttons (parameter 1)
The effect time is set from 1/8 to 4/1 with respect to 1 beat of
BPM time.
TIME (parameter 2)
Use this to set the effect time.
10 to 4000 (ms)
LEVEL/ DEPTH (param-
eter 3) Use this to set the balance between the original sound and
ROLL.
EFFECT FREQUENCY
(parameter 4) Use these to set the balance between the original sound and
the ROLL for the different bands.
SLIP ROLL 1 2
1/1 repeat 1/2 repeat
Original
Roll
Changed from 1/2
to 1/1
Effect turned on
This function records the input sound at the point at which the [ON/ OFF] but-
ton is pressed and repeats the recorded sound according to the beat button’s
fraction.
When the effect time changes, the input sound is recorded again.
Beat buttons (parameter 1)
The effect time is set from 1/8 to 4/1 with respect to 1 beat of
BPM time.
TIME (parameter 2)
Use this to set the effect time.
10 to 4000 (ms)
LEVEL/ DEPTH (param-
eter 3) Use this to set the balance between the original sound and
ROLL.
EFFECT FREQUENCY
(parameter 4) Use these to set the balance between the original sound and
the ROLL for the different bands.