Pioneer VSX-917V - Manuel (Page 61)

Other connections 10
61
En
English
Français
Deutsch
Nederlands
Italiano
Español
• Use a 3-ringed miniplug SR+ cable
1
to
connect the CONTROL IN jack of this receiver
with the CONTROL OUT of your plasma
display.
Before you can use the extra SR+ features, you
need to make a few settings in the receiver. See
SR+ Setup for Pioneer plasma displays on
page 65 for detailed instructions.
To make the most of the SR+ features, you
should connect your source components (DVD
player, etc.) in a slightly different way to that
described in this chapter. For each
component, connect the video output directly
to the plasma display, and just connect the
audio (analog and/or digital) to this receiver.
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a
number of features become available to make
using this receiver with your Pioneer plasma
display even easier. These features include:
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the
plasma display.
• Automatic volume muting on the plasma
display. 2
See also SR+ Setup for Pioneer plasma
displays on page 65 for more on setting up the
receiver.
1 Make sure that the plasma display and
this receiver are switched on and that they
are connected with the SR+ cable.
See Using this receiver with a Pioneer plasma
display above for more on this.
2 To switch SR+ mode on/off, press
RECEIVER, then the SR+ button.
The front panel display shows
SR+ ON or OFF.
Note
1 • The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus-
tomer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed mini
phone plug for the connection).
• If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma dis-
play remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control if you
switch the plasma display off.
DVD player
This receiver
Pioneer plasma
display
Satellite receiver, etc
VIDEO
INPUT 1
VIDEO
INPUT 2
TV/SAT
AUDIO IN
DVD
AUDIO IN
UP DOWN
MULTI JOG
MASTER
VOLUME
ENTER
VSX-917
STANDBY/ON
PHONES
DVD/LD TV / SAT DVR / VCR VIDEO/FRONT AUDIO CD CD-R / TAPE / MD FM/AM XM
MIDNIGHT/ LOUDNESS SB ch PROCESSING SOUND RETRIEVER
ACOUSTIC EQ PHASE CONTROL AUTO SURR/ DIRECT
TUNING/ STATION SETUP RETURN
TONE
TUNER EDIT SIGNAL SELECT SPEAKERS
MULTI JOG
STANDARD ADVANCED
SURROUND STEREO/
F.S.SURR
LISTENING MODE
SIRIUS AUX
PHASE CONTROL
MCACC/
AUDIO IN AUDIO R L VIDEO DIGITAL IN VIDEO INPUT
DIGITAL PRECISION PROCESSING
2 The automatic volume muting feature is enabled separately; see SR+ Setup for Pioneer plasma displays on page 65.
RECEIVER SOURCE INPUT
SELECT
TV DVR TV CTRL
CD RECEIVER AM FM
DVD
XM RADIO SIRIUS CD-R/TAPE
F.AUDIO
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
ANALOG
ATT
MIDNIGHT
SB ch
DIMMER
SLEEP
SR+
+10 D.ACCESS
SIGNAL SEL
CLASS DISC
ENTER
TUNE
ST ST
ENTER
TOP MENU
T.EDIT DTV MENU
MENU
VSX_917.book.fm Page 61 Thursday, December 7, 2006 4:40 PM