Pioneer VSX-917V - Manuel (Page 30)

Listening to your system 05
30
En
Listening in stereo
When you select STEREO you will hear the
source through just the front left and right
speakers (and possibly your subwoofer
depending on your speaker settings).
Dolby Digital and DTS multichannel sources
are downmixed to stereo.
• While listening to a source, press
STEREO/F.S.SURR for stereo playback.
Press repeatedly to switch between:
• STEREO – The audio is heard with your
surround settings and you can still use the
Midnight, Loudness, and Tone functions.
• F.S.S.FOCUS – See Using Front Stage
Surround Advance below for more on this.
• F.S.S. WIDE – See Using Front Stage
Surround Advance below for more on this.
Using Front Stage Surround
Advance
The Front Stage Surround Advance function
allows you to create natural surround sound
effects using just the front speakers and the
subwoofer.
• While listening to a source, press STEREO/
F.S.SURR to select Front Stage Surround
Advance modes.
• STEREO – See Listening in stereo above for
more on this
• F.S.S.FOCUS – Use to provide a rich
surround sound effect directed to the
center of where the front left and right
speakers sound projection area converges.
• F.S.S. WIDE – Use to provide a surround
sound effect to a wider area than
FOCUS
mode.
1
Using Stream Direct
Use the Stream Direct modes when you want
to hear the truest possible reproduction of a
source. All unnecessary signal processing is
bypassed.
Center
Image
b
(Applicable
only when
using a cen-
ter speaker)
Adjusts the center image to
create a wider stereo effect with
vocals. Adjust the effect from
0
(all center channel sent to front
right and left speakers) to
10
(center channel sent to the
center speaker only).
0 to 10
Default: 3
Effect Sets the effect level for the
currently selected Advanced
Surround mode (each mode
can be set separately). 10 to 90
a Only available with 2ch sources in Dolby Pro Logic IIx Mu-
sic mode (also available with
2 Pro Logic II 5.1sound).
b Only available with 2ch sources in Neo:6 Music mode.
Setting What it does Options
AUTO SURR STANDARD ADV.SURR STEREO/
F.S.SURR
Note
1 When using F.S.S. WIDE, a better effect can be obtained if Auto MCACC Setup is performed. For more on this, refer to
Automatically setting up for surround sound (MCACC) on page 8.
AUTO SURR STANDARD ADV.SURR STEREO/
F.S.SURR
Front left
speaker
Front right
speaker
FOCUS position (Recommend)
Front left
speaker
Front right
speaker
WIDE position
AUTO SURR STANDARD ADV.SURR STEREO/
F.S.SURR
VSX_917.book.fm Page 30 Thursday, December 7, 2006 4:40 PM