Pioneer VSX-917V - Manuel (Page 57)

Other connections 10
57
En
English
Français
Deutsch
Nederlands
Italiano
Español
Tip
• You can select channels directly by
pressing D.ACCESS then the three-digit
channel number.
• You can press DISP to change SIRIUS
Radio information in the front panel
display.
• The currently selected channel is
automatically chosen (without pressing
ENTER) after 10 seconds.
Saving channel presets
This receiver can memorize up to 30 channels,
stored in three banks, or classes, (A, B and C)
of 10 stations each.
1 Select the channel you want to memorize.
See Selecting channels and browsing by genre
above.
2 Press T.EDIT.
The display shows a blinking memory class.
3 Press CLASS to select one of the three
classes then press / to select the channel
preset you want.
You can also use the number buttons to select
a preset.
4 Press ENTER.
After pressing ENTER, the preset class and
number stop blinking and the receiver stores
the SIRIUS channel.
Tip
• You can also press  during reception
display to save the information of up to 8
songs. See Using the SIRIUS Menu below
to recall this information.
Listening to channel presets
You will need to have some presets stored to do
this.
1 Press CLASS to select the class in which
the channel is stored.
Press repeatedly to cycle through classes A, B
and C.
2 Press / to select the channel preset
you want.
• You can also use the number buttons on
the remote control to recall the channel
preset.
Using the SIRIUS Menu
The SIRIUS Menu provides additional SIRIUS
Radio features.
1 Press TOP MENU.
2 Use / to select a menu item then
press ENTER.
Choose between the following menu items:
• Memory Recall – Use / to browse your
saved song information (see Tip above)
• Channel Skip/Add – Use / and
ENTER to select channels you would like
to remove/restore from/to the channel
guide.
• Parental Lock – Use
/ and ENTER to
select channels you would like to place
under parental lock. Channels put under
parental lock are not displayed in the
Channel Guide, but may be accessed by
directly inputting their channel number
and providing the parenal lock password.
• Antenna Aiming – Check the strength of
satellite and terrestrial reception.
• Password Set – Set the parental lock
password.
3 When you’re finished press TOP MENU
to return to the reception display.
Connecting using HDMI
If you have a HDMI or DVI (with HDCP)
equipped component, you can connect it to
this receiver using a commercially available
HDMI cable.
The HDMI connection transfers uncompressed
digital video, as well as almost every kind of
digital audio that the connected component is
compatible with, including DVD-Video,
DVD-Audio (see below for limitations),
Video CD/Super VCD, CD and MP3.
VSX_917.book.fm Page 57 Thursday, December 7, 2006 4:40 PM