Connecting the projector to a monitor, Connecting to rs-232c /mouse p ort – Sharp PG-M15X Manuel d'utilisation

Page 19

Advertising
background image

Setup & Connections

17

Connecting the Projector

Connecting the Projector to a Monitor

When the ANALOG OUTPUT port on the projector is connected to a monitor with RGB input, the computer can be
used to display the output image to the projector and the monitor simultaneously. Use the supplied computer RGB
cable to connect them.
1 Connect one end of the supplied computer RGB cable to the ANALOG OUTPUT port on the projector.
2 Connect the other end to the RGB input port on the monitor.

3 RS-232C cable

(null modem, cross type, sold separately)

Projector

DVI-Analog to VGA adaptor

2 DIN-D-sub

RS-232C cable

• The analog output is deactivated when the projector is in standby mode.
• An additional RGB cable may be necessary to connect the projector to an external monitor if the supplied cable is utilized for projector

data input.

1

Projector

Computer RGB cable

2

Monitor

Connecting to

RS-232C

/MOUSE Port

When the RS-232C/MOUSE port on the projector is connected to a computer with an RS-232C cable (null modem,
cross type, sold separately), the computer can be used to control the projector and check the status of the
projector. See page 52 for details.

DVI-Analog to VGA cable

DIN-D-sub RS-232C
cable

1 Connect the projector and computer in advance, as

described on page 13 or 14.

2 Connect the supplied DIN-D-sub RS-232C cable to

the RS-232C/MOUSE port on the projector.

3 Connect an RS-232C cable (null modem, cross type,

sold separately) to the other end of DIN-D-sub RS-232C
cable and to the serial port on the computer.

CAUTION

• Do not connect or disconnect an RS-232C cable to or from the

computer while it is on. This may damage your computer.

• When you turn off the power, be sure to turn the projector off

first, and then turn the connected computer off.

• The wireless mouse or RS-232C function may not operate if your

computer port is not correctly set up. Please refer to the operation manual
of the computer for details on setting up/installing the correct mouse
driver.

• A Macintosh adaptor may be required for use with some Macintosh

computers. Contact your nearest Sharp Authorized Projector Dealer or
Service Center.

Computer RGB cable

Computer

Model name AN-C10RS

PC audio cable

Computer RGB cable

DVI digital cable (sold separately)

Model name AN-C3DVU

DVI-Analog to VGA cable

DVI-Analog to VGA
adaptor

Advertising