Sharp PG-M15X - Manuel (Page 17)

Setup & Connections
15
Connecting the Projector
Connecting the Projector to Video Equipment
You can connect your projector to a VCR, laser disc player and other audiovisual equipment.
CAUTION
• Always turn off the projector while connecting to audiovisual equipment, in order to protect both the projector and the
equipment being connected.
Connecting a video source (VCR or laser disc player) using the standard video input
S-video cable
1 Connect the supplied S-video cable to the S-VIDEO
INPUT 2 terminal on the projector and the S-video output
terminal on the video source, or connect the supplied
video cable to the VIDEO INPUT 3 terminal on the
projector and the video output terminal on the video
source.
2 To use the built-in audio system, connect the supplied
AV audio cable to the AUDIO INPUT terminal on the
projector and the audio output terminals on the video
source.
The S-VIDEO INPUT 2 terminal uses a video signal system
in which the picture is separated into a color and a
luminance signal to realize a higher-quality image.
• For higher quality video, you may use the S-VIDEO INPUT 2
terminal on the projector.
• If your video equipment does not have an S-video output
terminal, use the composite video output terminal.
2
1
S-video cable
AV audio cable
VCR or
Laser disc player
Projecting the image
• When connecting to the S-VIDEO
INPUT 2 terminal on the projector,
press INPUT on the remote control
or the projector and select the input
signal type to INPUT 2 S-VIDEO.
• When connecting to the VIDEO
INPUT 3 terminal on the projector,
press INPUT on the remote control
or the projector and select the input
signal type to INPUT 3 VIDEO.
Video cable
1
Projector
2
To S-video output terminal
AV audio cable
To audio output terminals
Video cable
To video output terminal