John Deere AC-2600GH - Manuel (Page 35)

AC-Series Operator’s Manual-E/F 35
CHECKING WATER PUMP OIL
IMPORTANT: If oil is white or foaming, water is in the
oil reservoir. Change oil.
NOTE: Water in oil occurs as a result of spray or
condensation. Milky oil is not indicative of a pump
malfunction.
1. Stop engine.
2. Put unit on level surface.
3. Oil level can be checked as follows:
•ALL MODELS: View level through clear window (A). Oil
should fill sight glass.
•Additional method for AC-2500GH, AC-2700GH,
AC-3300GH, AC-2700GS, AC-3000GS and AC-3500GH
only:
- Remove dipstick (B) and wipe clean. Put dipstick
in hole. Remove dipstick and check level. Oil level
should be located at notch (C) on AC-2500GH and
at dipstick ring (D) on AC-2700GH, AC-3300GH,
AC-2700GS, AC-3000GS and AC-3500GH.
4. Add HY-GARD ® or SAE75W-90 Synthetic oil if
necessary. Do not overfill.
HY-GARD ® SAE75W-90 Synthetic
AC-2500GH AC-2000GH
AC-2700GH AC-2400GH
AC-2700GS AC-2400GS
AC-3000GS AC-2600GH
AC-3300GH
AC-3500GH
PIC72-101
199R0
PIC71•102299R0
PIC70-101
199R0
C
AC-2500GH
PIC155•1
13099R0
AC-2700GH / AC-3300GH
AC-2700GS / AC-3000GS / AC-3500GH
AC-2000GH / AC-2400GH
AC-2600GH / AC-2400GS
Service
A
B
A
B
A
D