John Deere AC-2600GH - Manuel (Page 26)

26 AC-Series Operator’s Manual-E/F
Operating the Washer
REMOVING PAINT
IMPORTANT: Remember that high pressure spray can
gouge soft woods and other materials, as
well as loosen grout.
1. Direct spray at a 45° angle about 4 to 12 inches (10 to
30 cm) from surface.
2. Spray in a back and forth motion, try to get beneath
the loose and bubbled paint.
3. Do not be concerned with the paint that remains. It
should be sufficiently bonded so as not to cause
repainting problems.
4. Some remaining paint may curl up at the edges. These
edges should be scraped with a steel brush or scraper
just before painting.
CLEANING RADIATOR FINS
IMPORTANT: Some engine and radiator manufacturers
may not permit cleaning radiators with a
high pressure washer. See equipment
Operator’s Manual.
1. Use clean water without detergent.
IMPORTANT: Spray straight into the radiator to prevent
bending fins.
2. If possible, direct spray in the direction opposite to
normal air flow through the radiator.