Inserting interface modules – Juniper Networks ISG 2000 Manuel d'utilisation

Page 45

Advertising
background image

Removing and Inserting Interface Modules

NetScreen-ISG 2000

39

3.

Grip the levers, then gently slide the card straight out.

Inserting Interface Modules

To insert an interface module into a module bay:

1.

Align the side edges of the card with the grooves in the side walls of the bay.

2.

Slide the card in until the card is forced to stop.

3.

With your thumbs, push in the locking levers to secure the module.

Warning:

When inserting and removing a card in bay 2, take care that the electromagnetic

interference (EMI) fingers located along the top edge of the front wall of the interface module
do not catch on the lower edge of the card above it in bay 1.

Warning:

When inserting or removing interface modules, be sure that the power is off.

Warning:

When inserting and removing a card in bay 2, take care that the

electromagnetic interference (EMI) fingers located along the top edge of the front
wall of the interface module do not catch on the lower edge of the card above it in
bay 1.

Advertising