Removing and inserting interface modules, Removing interface modules, Emoving – Juniper Networks ISG 2000 Manuel d'utilisation
Page 44: Nserting, Nterface, Odules
Chapter 4 Servicing the Device
38
User’s Guide
R
EMOVING
AND
I
NSERTING
I
NTERFACE
M
ODULES
The NetScreen-ISG 2000 has four interface module bays. The supplied modules are pre-
installed, although they are removable and replaceable.
There are three types of interface modules:
•
10/100 Base-T module (four ports)
•
10/100 Base-T module (eight ports)
•
Mini-GBIC interface connector module (two ports)
You can use these interface modules in whatever combination and arrangement suits the
needs of your network infrastructure.
Removing Interface Modules
To remove an interface module from a bay:
1.
Unscrew the thumbscrews on each side of the interface module.
2.
With your thumbs, pull the blue locking levers out.
Warning:
When inserting or removing interface modules, be sure that the power is off.