Marantz DV7110 - Manuel (Page 14)

14
ENGLISH
Video Connections
This player features S-video, composite, and component
video output possibilities.
Check the manual supplied with your TV or monitor to
determine the best possible connection for your system.
In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size. You
can use the [Setup Navigator] in the Setup screen General
to set whether you are using a wide screen or standard size
TV or monitor (page 16). Additionally, you can use the [TV
Screen] setting in the Setup screen Video menu (page 26).
S-VIDEO OUT
Make S-video connections to a TV or monitor with S-video
input to produce a high quality video image.
Use an S-video cable (not supplied) to connect the output on
the player to S-video input on the TV or monitor.
When making S-video connections, make sure to set the
VIDEO OUT SELECT switch on the rear panel of the player
to the right to assign S-video output.
VIDEO OUT
• Make composite video connections to a standard TV or
monitor with a video input jack.
• Use the supplied video cable to connect the VIDEO OUT
jacks on the player to the video input on the TV or monitor.
• Be sure to match the color of the plug with the color of the
jack (yellow).
• When making video connections, make sure to set the
VIDEO OUT SELECT switch on the rear panel of the player
to the right to assign composite video output.
System Control Connections
REMOTE CONTROL IN/OUT jacks
By connecting this DVD player to another Marantz audio component
using a supplied remote control cable, you can remotely operate the
components as a single system.
• When connecting to component with a remote sensor
(such as the SR-14, SR-18, SR-19), be sure to connect the
“REMOTE CONTROL IN” jack of this DVD player to the
“REMOTE CONTROL OUT” jack of the component with the
remote sensor.
• When connecting to component which is not equipped with
a remote sensor, be sure to connect the component to the
“REMOTE CONTROL OUT” jack of this DVD player.
Synchronized power on and off
• Connect with the remote control output jack of a
component (such as the SR-14, SR-18, SR-19) which is
compatible with Marantz remote control system. The
remote control allows to switch the power of this DVD
player to “POWER ON and Standby mode”.
Note
be sure to leave power switch on the Front panel in the power mode.
RS232C CONTROL switch
To control the DVD player with the remote controller, set this switch to
RC-5/6.
Remote switch
• When using this DVD player independently, set this switch
to “INTERNAL”. When using this DVD player in a system
with a Marantz tuner or timer equipped with a remote
sensor, set the switch to “EXTERNAL.
TV or monitor
TV or
monitor
COMPONENT VIDEO OUT
(Interlace/Progressive-scan)
• Make component video connections to a TV or monitor with
component inputs to produce a higher quality video image.
• Use a component video cable or 3 video cords (not
supplied) to connect the COMPONENT VIDEO OUT jacks
on the player to the component jacks on the monitor.
• If connected to a progressive-scan compatible TV, set the
[Component Video] menu to [Progressive] (page 27).
• When making component video connections, make sure to
set the VIDEO OUT SELECT switch on the rear panel of
the player to the left to assign component video output.
TV or monitor
OUTPUT VIDEO
DVD 2 DVD 1 CODE CONTROL REMOTE
IN
OUT
S2 VIDEO 2 1 COAXIAL EXTERNAL VIDEO/S2 INTERNAL
2 R
L 1
CONTROL REMOTE OPTICAL
OUTPUT AUDIO
COMPONENT
OUTPUT VIDEO OUTPUT DIGITAL COMPONENT
RS-232C RS-232C CONTROL RC-5 / 6 RS-232C
Y
CR
/PR
CB
/PB
VIDEO IN
1
2
VIDEO OUTPUT
VIDEO
VIDEO/S2
COMPONENT
(yellow)
(yellow)
OUTPUT VIDEO
DVD 2 DVD 1 CODE
CONTROL REMOTE
IN
OUT
S2 VIDEO 2 1 COAXIAL EXTERNAL VIDEO/S2 INTERNAL
2 R
L 1
CONTROL REMOTE
OPTICAL
OUTPUT AUDIO
COMPONENT
OUTPUT VIDEO OUTPUT DIGITAL COMPONENT
RS-232C RS-232C CONTROL RC-5 / 6 RS-232C
Y
CR
/PR
CB
/PB
S-VIDEO IN
S2
OUTPUT
VIDEO
VIDEO/S2
COMPONENT
OUTPUT VIDEO DVD 2 DVD 1 CODE CONTROL REMOTE
IN
OUT
S2 VIDEO 2 1 COAXIAL EXTERNAL VIDEO/S2 INTERNAL
2 R
L 1
CONTROL REMOTE OPTICAL
OUTPUT AUDIO COMPONENT
OUTPUT VIDEO OUTPUT DIGITAL COMPONENT
RS-232C RS-232C CONTROL RC-5 / 6 RS-232C
Y
CR
/PR
CB
/PB
COMPONENT
VIDEO IN
C
Y
R
B
C
COMPONENT
OUTPUT
VIDEO
VIDEO/S2
COMPONENT
Y
C R
/P R
C B
/P B
OUTPUT VIDEO
DVD 2 DVD 1 CODE CONTROL REMOTE
IN
OUT
S2 VIDEO 2 1 COAXIAL EXTERNAL VIDEO/S2 INTERNAL
2 R
L 1
CONTROL REMOTE OPTICAL
OUTPUT AUDIO
COMPONENT
OUTPUT VIDEO OUTPUT DIGITAL COMPONENT
RS-232C RS-232C CONTROL RC-5 / 6 RS-232C
Y
CR
/PR
CB
/PB
OUT
IN
OUT
IN
REMOTE
CONTROL
EXTERNAL
INTERNAL