Curtis RWD200 - Manuel (Page 26)

P.26
REMOVE THE PROBLEMS
Alarm Code
Door lock
problem
Door is not closed properly. Restart after the door is closed
Reason Solution Description
Please call up service line if there are still troubles.
Drain problem
while washing
(drain time
exceeds 3 minutes)
Water injecting
problem when
washing (water
injecting time
exceeds 5
minutes)
Tap is not opened or water
flows too slowly.
Inlet valve filter is blocked.
Inlet pipe is twisted.
If water is not supplied
Open the tap or wait till
the water supply
becomes normal.
Check inlet valve filter.
Straighten the water pipe
Check the other taps in
the room.
Please call up service line if there are still troubles.
Please call up service line if there are still troubles.
Outlet hose is blocked or
twisted
Drain pump is blocked Wash and straighten outlet
hose.
Wash drain pump filter
Please call up the service line if there is any other problem.
E30
E10
E21