Laerdal SimJunior Advanced - Manuel (Page 19)

17
Sim
ulation Softwar
e
Sim
ulator Setup
Maintenance
Spar
e Par
ts
Specifications
Intr
oduction
Tr
oubleshooting
Troubleshooting
• Check for flaws or tearing in the lung bladder.
• Check that there are no obstructions inside the Simulator airways
which may block air flow.
• If there is no change when adjusting lung compliance, contact
Laerdal Technical Service.
• If there is no change in lung resistance, contact Laerdal Technical
Service.
Mechanical Noise during Auscultation
In LLEAP click <Auscultation focus>.
Pulses (Radial and Brachial)
Problem
• Cannot feel pulses
Possible Solutions
• Skin may be too tight over pulse units – re-adjust skin and reboot.
• Ensure blood pressure is set to at least 60 systolic.
• Ensure compressor is ON.
Note: If the radial pulse is set below 60, peripheral pulses may
disappear.
Simulator Shutdown
Problem
• The Simulator is unresponsive.
Solution
1. Power off the Link Box.
2. Turn the SimPad off, or if you are using LLEAP turn the instructor
PC off.
3. Restart everything.
If the Simulator is still unresponsive, contact your Laerdal representative.