Sony STR-DE705 - Manuel (Page 27)

Remote Button Descriptions
Remote Button Descriptions
For buttons not described on previous pages and buttons with names different from the buttons on the main unit.
Remote
Button
Operates Function
0-9 Receiver Selects preset numbers.
CD player/MD
deck/LD player Selects track numbers.
0 selects track 10.
TV/VCR Selects channel numbers.
CH/PRESET
+ /- Receiver Scans and selects preset
stations.
TV/VCR Selects preset channels.
INDEX Receiver Selects station index
names for index select
tuning.
D. SKIP CD player Skips discs (CD player
with multi-disc changer
only.)
CD player Searches tracks (forward
or backward).
Tape deck/MD
deck/VCR/LD
player Fast forwards or rewinds.
CD player/
MD deck/LD
player Skips tracks.
II CD player/
Tape deck/MD
deck/LD
player/VCR Pauses play or record.
(Also starts recording
with components in
record standby.)
► CD player/
Tape deck/MD
deck/LD
player/VCR
Starts play.
■ CD player/
Tape deck/MD
deck/LD
player/VCR Stops play.
Tape deck Starts play on the reverse
side.
• Tape deck Sets tape decks to the
record standby mode.
Tape deck/
MD deck/
VCR Starts recording when
pressed with ► (or
on tape deck).
Remote
Button Operates Function
RMS
DIRECTION Tape deck Selects tape direction (for tape
decks with the RMS' function.)
RMS CLEAR Tape deck Clears RMS* program (for tape
decks with the RMS function.)
RMS
DIRECTION Tape deck Programs tracks (tape deck
with the RMS* function only).
ENTER TV/VCR Changes channels when used
with 0-9.
TV/VIDEO TV/VCR Selects input signal: TV input
or video input.
VISUAL
POWER TV/VCR/
LD player Turns on or off the power.
TV CONTROL
ON TV Turns on the TV, switches the
input to "TV," and sets the
remote to operate the TV.
TV Selects the channel entry
mode, either one or two digit
(in Europe only).
SLIBCH+/- TV Selects preset channels for the
small picture.**
POSITION TV Changes the position of the
small picture.**
SWAP TV Swaps the small and the large
picture.**
PINP TV Activates the picture-in-
picture function.**
JUMP TV Jumps back and forth between
the previous and current
channels.
ANTTV/VTR VCR Selects output signal from the
antenna terminal: TV signal or
VCR program.
MASTER VOL
+ 1- TV Normally, adjusts the master
volume of the receiver.
If TV CONTROL ON was
pressed, it adjusts the volume
on the TV.
MUTING TV Normally, mutes the sound
from the receiver.
If TV CONTROL ON was
pressed, the-sound on the TV
itself is muted.
SLOPE - Not applicable.
BAND - Not applicable.
RMS: Random Music Sensor
' Only for Sony TVs with the picture-in-picture function 27^