Sony STR-DE705 - Manuel (Page 14)

Receiver Operations
Recording on a video tape
You can record from a VCR, a TV, or an LD player
using the receiver. You can also add audio from a
nfariety of audio sources when editing a video tape. See
your VCR or LD player's mstruction manual if you
need help.
1 Press one of the function buttons to select the
program source to be recorded.
2 Set the component to be ready for playing.
For example, insert the laser disc you want to
record from into the LD player,
3 Insert a blarrk video tape into the VCR (VIDEO 1
or VIDEO 2) for recording.
Using the Sleep Timer [J
You can set the receiver to turn off automatically at a
time you specify.
SLEEP-
"C
о О о ©
о а а о а
о а о а о
о О О О о
О О О о
О О О о
о о О о
CD
Start recording on the recording VCR and then
start playing the video tape or laser disc you want
to record.
You can replace audio while copying a video tape or
laser disc
At the point you want to start adding different sound,
press another function button (for example, CD) and
start playback. The sound from the selected component
will be recorded over the original audio.
To resume recording the sound of the original playback
source, press the funrtion button for that component.
Press SLEEP on the remote while the power is on.
Each time you press SLEEP, the time changes as shown
below.
c
2:00:(Ю — 1:30:00— 1:00:00 — 0:30:00 — OFF
□
The display dims after you specify the time.
You can freely specify the tim e
Press SLEEP first, then specify the time you want using
the digital processing control (A or V ) buttons. The
sleep time changes in 1 minute intervals. You can
specify up to 5 hours.
You can check the time remaining before the
receiver turns off
Press SLEEP. The remaining time appears in the
display.
14^