Sony STR-DE705 - Manuel (Page 20)

Advanced Remote Operations
Operating One Component
While Using Another
^background operation)
You can temporality operate other components while
listening to or watching a program.
Numeric -
buttons
BACKGROUND -
t :
O o o o(!
Op o O
-HO 0 0
b o p
-e ojOjo o
os® OCD
1 Hold down BACKGROUND.
2 Press both the corresponding numeric button of
the component you're going to use (see the table
below) and one of the following buttons at the
same time; VISUAL POWER, TV/VIDEO, CH
PRESET +/-, ANT TV/VTR, D.SKIP, ►,
■,
•«/►►, 1^/►►), II, •.
ExamplerTo start recording on a tape deck while
listening to a CD
While holding down BACKGROUND,
press 4 (or 5) and press • + ► at the
same time.
The numeric buttons are assigned to select the
functions as follows:
Numeric button Operates
1 CD player
2 DAT deck
3 MD deck
4 Tape deck A
5 Tape deck B
6 LD player
7 VCR (remote control mode VTR I*")
8 VCR (remote control mode VTR-2*) .
9 VCR (remote control mode VTR 3’)
0 TV
Sony VCRs are operated with a VTR 1, 2 or 3 setting.
These correspond to Beta, 8mm and VHS respectively.
Changing the Factory Setting
of a FUNaiON Button
If the factory settings of the FUNCTION buttons (page
10) don't match your system components, you can
change them. For example, if you connect a Sony LD
player to the VIDEO 2 jacks, you can assign the VIDEO
2 button to set the remote to control the LD player.
Note that the settings of the TUNER and PHONO
buttons cannot be changed.
Numeric ■
buttons
O o
aaoacD
ocDoao
o
SYSTEM
CONTROL/
FUNCTION
o o o
o o o
o o o
oolOfoo
1 Holding down the SYSTEM CONTROL /
FUNCTION button whose function you want to
change (VIDEO 2, for example).
2 Press the corresponding numeric button of the
component you want to assign to the SYSTEM
CONTROL/FUNCTION button (6 - LD player,
for example).
For the numeric buttons, see the table in
"Operating One Component While Using
Another."
Now you can use the VIDEO 2 button to control
your Sony LD player.
To reset the setting to the factory setting
Repeat the above procedure.
20"'