Napoleon Fireplaces Linear Patioflame - Manuel (Page 8)

www.napoleongrills.com
8
EN
12.600” C-C Mounting Location
#8 Wood Screw
Recommended
Raise the burner unit by 3/4”
above the enclosure surface
as illustrated.
Insert cap (N510-0012) into end of
control panel as shown.
WARNING!
Materials placed around the burner unit will get extremely hot. They must be non-
combustible and must be able to expand and contract without cracking. Raise the burner unit above
the enclosure by (3/4”) to reduce the temperature of the enclosure surface. Tiled cement board is the
preferred material.
WARNING!
Cabinet frame, cabinet and counter top must be made from non-combustible material.
WARNING!
You must have clear and easy access to the on/off valve AFTER the appliance is
installed and connected to the gas supply in order to safely turn off the burner.