Lighting instructions – Napoleon Fireplaces Linear Patioflame Manuel d'utilisation

Page 16

Advertising
background image

www.napoleongrills.com

16

EN

Lighting Instructions

WARNING!

Never use the appliance when it is raining. A cover has been provided to protect the

burner and glass embers when not in use. Remove the cover before starting the appliance.

WARNING!

Keep face and body away from burner area when lighting.

WARNING!

Ensure burner controls are in the off position. Slowly turn on the gas supply valve.

1. Press and hold electronic igniter button ( ).

2. Turn the burner control to the high position, press and hold in. When the burner

lights, release the electronic igniter button.

3. Continue to depress the burner control knob for 30 seconds and then release. If

the flame goes out, repeat the procedure.

4. Adjust the flame to the desired height with the burner control knob.

5. If the burner will not light with the electronic igniter, hold a lit long match or lit

long butane lighter to the ignition area of the burner and continue with step 2.

6. To shut down the burner turn the burner control knob clockwise to the off position.

Then turn the gas off at the source (propane cylinder valve or natural gas supply

valve).

WARNING!

The propane cylinder is equipped with an excess flow device. Unless burners are

turned off prior to turning the cylinder on, only small flames and low heat will be achievable.

WARNING!

If the burner does not light within 10 seconds, turn the valve off and wait 5 minutes for

any gas to dissipate before repeating the procedure.

If lighting the unit with a match, clip the match into the supplied lighting rod.

Igniter

Open Cover

Advertising