Napoleon Fireplaces GSS42 - Manuel (Page 7)

7
W415-0617 / E / 06.13.12
For ease of accessibility, an optional remote wall switch or millivolt thermostat may be installed in a convenient
location. Route a 2 strand, solid core millivolt wire from the valve to the wall switch or millivolt thermostat. The
recommended maximum lead length depends on wire size:
WIRE SIZE MAX. LENGTH
14 gauge 100 feet
16 gauge 60 feet
18 gauge 40 feet
Disconnect the existing wires from terminals 1 and 3 (from the
ON/OFF switch) and replace with the leads from the wall switch / millivolt thermostat.
50.3
PIL
O
T
!
WARNING
DO NOT CONNECT EITHER THE WALL SWITCH, THERMOSTAT OR GAS VALVE DIRECTLY TO 110
VOLT ELECTRICITY.
TP
3.2 GAS INLET LOCATIONS
3.3 OPTIONAL WALL SWITCH INSTALLATION
7 1 /
8
"
" 15 5 /
16
7 1 /
8
"
" 14
" 23 5 /
16
16 1 /
16
"
There are fi ve gas inlet locations on the ventless fi rebox enclosure. One on each side of the appliance, two
at the rear, and one on the bottom. Using the following illustrations identify the preferred inlet and remove
corresponding knock out.