Napoleon Fireplaces GSS42 - Manuel (Page 13)

13
W415-0617 / E / 06.13.12
IMPORTANT
IT IS HIGHLY RECOMMENDED TO PROTECT THE LOGS FROM MOISTURE.
COVER THE FIREBOX WHEN NOT IN USE.
3
4
5
C. Place the end of log #3 on the right side of
the knot of log #1. The “Y” in the log should
straddle the knot on top of log #2. D. Place locating pin in the end of log #4 into the
hole in log #2. Place the locating pin on the
underside of the “Y” in log #4 into the hole in
log #1.
E. Position the slot in the bottom of log #5 onto
the bracket beside the burner on the right,
and against the back side of the andiron with
the charred face of the log to the front.
5.3 GLOWING EMBERS
Glowing embers (not supplied) may be used to enhance the fl ame’s appearance.
5.4 CHARCOAL LUMPS/LAVA ROCK
A. Place lava rock around the base of the fi replace,
making sure not to block any burner ports or valve
access. Retain a small amount of lava rock for step C.
B. Place formed charcoal lumps around the front and
sides of the unit.
C. Use remaining lava rock to blend with the charcoal
lumps.