Napoleon Fireplaces Vector 45 - LHD45 - Manuel (Page 30)

W415-0834 / E / 06.13.13
30
EN
IMPORTANT: The LHD45 requires a minimum inside enclosure height of 56” (1422.4mm) , measured from the
bottom of the appliance. For temperature requirements, this area must be left unobstructed. It is recommended
that the enclosure be ventilated at the top and bottom to circulate the hot air.
5.1 MINIMUM CLEARANCE TO COMBUSTIBLE ENCLOSURES
* See “VENTING” section.
TOP OF
FIREPLACE
OPENING
SHELF
COMBUSTIBLE
0” (0mm) IF NON-
COMBUSTIBLE
FINISHING IS USED
SUCH AS BRICK AND
STONE.
NON-COMBUSTIBLE
NON-COMBUSTIBLE
MATERIAL
VENT HEAT SHIELD
1" 25mm
2" 51mm
2" 51mm
1" 25mm
6" 152mm
MIN
45 13/16"
1164mm
MIN PLUS
RISE*
56 "
1422mm
MINIMUM
ENCLOSURE
HEIGHT
30 11/16"
780mm
MIN
18 3/16"
462mm
12 1/2"
317mm
14"
356mm
25 5/16"
643mm
MIN