Napoleon Fireplaces High Definition 81 - HD81 - Manuel (Page 27)

W415-0687 / G / 08.26.13
27
EN
5.3 STEEL STUD FRAMING KIT
8
3
2
5
6
7
4
10
9
11
1
REF NO. PART NO. DESCRIPTION DIMENSIONS QTY
1 W585-0269 STUD SHIELD 1” x 2” x 53” (25mm x 51mm x 1346mm) 2
2 W650-0017 STUD, OUTSIDE STEEL 1 1/2” x 3 1/2” x 48 5/8” (38mm x 89mm x 1235mm) 4
3 W650-0018 STUD, INSIDE STEEL 1 1/2” x 3 1/2” x 48 5/8” (38mm x 89mm x 1235mm) 4
4 W650-0019 STUD, BOTTOM STEEL 1 1/2” x 3 1/2” x 7 1/2” (38mm x 89mm x 191mm) 4
5 W650-0020 STUD, CENTER STEEL 1 1/2” x 3 1/2” x 13 3/8” (38mm x 89mm x 340mm) 4
6 W650-0026 STUD, TOP STEEL 1 1/2” x 3 1/2” x 54” (38mm x 89mm x 1372mm) 2
7 W650-0022 STUD, HEADER PLATE 1 1/2” x 3 1/2” x 41 7/8” (38mm x 89mm x 1064mm) 2
8 W570-0024 SCREW #8 x 1/2” 64
9 W475-0606 CEMENT BOARD SIDE PANEL 1/2” x 7 1/2” x 48 3/4” (13mm x 191mm x 1238mm) 4
10 W475-0605 CEMENT BOARD CENTER PANEL 1/2” x 15 1/2” x 38 7/8” (13mm x 394mm x 987mm) 2
11 W570-0017 SCREW #6 x 1” 30
!
WARNING
EDGES ARE SHARP, ALWAYS WEAR GLOVES WHEN WORKING WITH SHEET METAL.
5.3.1 INSIDE FRAME ASSEMBLY
3
3
5
6
7
NOTE: Ensure that narrow
edge of the stud is facing
the fireplace.
A. Lay out inside steel studs (3) and center steel studs (5)
on a large fl at surface.
B. Using the screws provided (8), attach the top steel
header (6) to the inside steel studs (3) and to the center
steel studs (5) on both edges.
C. Attach header plate stud (7) to the inside steel studs (3).