Napoleon Fireplaces Madison - GD80 - Manuel (Page 35)

35
W415-0695 / D / 08.13.12
4
BRACKET
NOTE: For propane, remove the screw from the #3 log support bracket. Move
the bracket to the right most location, then install the log.
5
D. Place log #4, with the charred branch pointed
inward. Locate the pins into the holes in log#1
and log#2, this will hold the rear log in position.
E. Place the end of log #5 on the right end of log
#1. The fork in the log should straddle the knot
on top of log #2.
F. Replace the glass door and screen assembly.
6.5 GLOWING EMBERS
Glowing embers are NOT recommended. The burner has been designed to achieve maximum glow without
embers.
6.6 CHARCOAL EMBERS
32.1
Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.