Napoleon Fireplaces Madison - GD80 - Manuel (Page 34)

34
W415-0695 / D / 08.13.12
6.4 LOG PLACEMENT
!
WARNING
FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE
ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY
DAMAGE OR PERSONAL INJURY.
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
76.1A
A. Place the rear log #1 onto the locating studs
along the back edge of the PHAZERAMIC™
burner.
B. Position log #2 onto the locators on the
PHAZERAMIC™ burner.
C. Position the slot on the bottom of log #3 onto
the bracket shown with the charred face of the
log to the front.
2
3
1
Phazer tm logs, exclusive to Wolf Steel Ltd. Fireplaces, provide a unique and realistic glowing effect that is
different in every installation. Log colors may vary. During the initial use of the appliance, the colors will
become more uniform as color pigments burn in during the heat activated curing process.
Positioning the logs improperly will cause fl ame impingement and carboning.
Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. PHAZER
TM
logs glow when exposed to direct fl ame. Use only certifi ed PHAZER TM logs available from your Authorized
dealer.
NOTE: The logs are fuel specifi c. Do not interchange. Refer to the replacement parts list.