Napoleon Fireplaces Madison - GD80 - Manuel (Page 25)

25
W415-0695 / D / 08.13.12
When roughing in the appliance, raise the appliance to accommodate for the thickness of the fi nished fl oor
materials, i.e. tile, carpeting, hard wood, which if not planned for will interfere with the removal of the hearth
strip, which must be removed to access the fi rebox.
If the intent is to use the Chelmsford mantel, a riser is required to lift the unit, while at the framing stage.
29 1/4”
5 1/2”
MAX
47”
48 3/4”
72”
MINIMUM
ENCLOSURE
HEIGHT
DO NOT BUILD INTO THIS AREA - IT MUST BE
LEFT CLEAR TO PROVIDE ADEQUATE CLEAR-
ANCE FOR THE VENT IN THIS 14” WIDE AREA
CENTERED ALONG THE FRONT OF THE FIRE-
PLACE. NO COMBUSTIBLES ARE ALLOWED.
5 1/2” MAX
14” MIN
!
WARNING