Napoleon Fireplaces Tureen™ - GD82T-TE - Manuel (Page 34)

34
W415-0769 / A / 12.10.10
6.4 AFK82/RFK82 FACING KIT INSTALLATION
A. Attach screw and spacer as illustrated to
the bottom and top of both sides of the front
housing.
B. Attach the two hooks as illustrated using
the screws supplied. (The hooks must be
installed on the inside of the bracket). These
hooks will catch the front in the event the
latch disengages.
C. Lift and hook the faceplate over the spacers,
starting with the bottom then pivoting the top
into place. Push the top of the faceplate so
the male catch engages the female catch.
D. The tension of the catch is easily adjusted
by using a slotted screwdriver on the set
screw of the female catch.
NOTE: A 1/4” gap must be maintained between
the front and all fi nishing material due to regular
removal.
SCREW
&
SPACER
RFK82 ILLUSTRATED
SET SCREW