Sony DCR-IP7BT - Manuel (Page 24)

24-
GB
Setting network preferences
(5) Select the Mail tab.
The Mail screen appears.
(6) Set up the following items:
User ID: Enter the user ID name you use for your provider.
Password: Enter the password of your user ID for accessing the POP server.
Your user ID and password are required to use e-mail.
Tip on “Password”
This “Password” is also referred to as a “mail password”, “mail server
password”, etc.
Address: Enter your e-mail address.
Tip on “Address”
This “Address” is also referred to as a “mail address”, “e-mail address”, etc.
POP Server: Enter the POP (Post Office Protocol) server address of your
provider. The POP server is for receiving e-mail.
Tip on “POP Server”
This “POP Server” is also referred to as a “mail server”, “POP3 server”, etc.
SMTP Server: Enter the SMTP (Simple Mail Transfer Protocol) server address
of your provider. The SMTP server is for sending e-mail.
Tip on “SMTP Server”
This “SMTP Server” is also referred to as a “mail server”, “SMTP mail server”,
etc. The SMTP server may be the same as the POP server, depending on the
provider.
APOP: Select whether you want to use APOP.
Tip on “APOP”
APOP is an authentication protocol for security. When your provider supports
APOP, we recommend that you check this item. For more information on
whether the provider support APOP or not, consult your provider.