Sony DCR-IP7BT - Manuel (Page 20)

20-
GB
(4) Select [Info.], then press the centre z on the control button.
The Bluetooth Setup: Self information screen appears.
To clear the Self Information screen
Select [Return], then press the centre z on the control button.
Radio wave indication
indicates the radio wave status of the connected Bluetooth device. (Use this
indication as a guide.)
Selecting other Bluetooth devices from the list
Select the Bluetooth device you want to specify, then press the centre z on the control
button in step 4 in “When using the Modem Adaptor with Bluetooth Function” on page
15. The device information is indicated. Select [Exit], then press the centre z on the
control button.
Deleting a registered Bluetooth device from the list
Up to three Bluetooth devices can be registered on the camcorder. When deleting a
Bluetooth device from the list, follow the procedure below.
(1) Open the Network Menu.
For details on how to open the Network Menu, refer to “Accessing the
network” in the operating instructions supplied with your camcorder.
The model name
This is the unique address assigned to each
camcorder at the factory. This address is used
when exchanging information between
devices. This address cannot be modified.
(The number indicated on the illustration is
an example number.)
Registering a Bluetooth device