Sony STR-DA3300ES - Manuel (Page 123)

123 GB
Us
ing th
e
Re
m
o
te
1
Press MACRO 1 or MACRO 2 for
more than 1 second while
pressing RM SET UP.
The RM SET UP button flashes.
Tip
When you press RM SET UP, use a thin wire,
such as a paper clip.
2
Press the input button of the
component that you want to
assign one of the following
operations.
The selected input button lights up.
3
Press the button for the
operation you want to perform
to learn the function as follows.
The input button selected in step 2 flashes
twice, then lights up again.
4
Repeat steps 2 and 3. When you
want to assign another
command for the same
component, repeat step 3.
5
Press RM SET UP to finish the
programming process.
Tip
If the RM SET UP button flashes five times in
step 1, and the macro programming process
does not start, replace the batteries with new
ones.
To cancel programming
Press RM SET UP. Also, not pressing any
button for 60 seconds cancels the settings.
The previous command remains valid.
Program the sequence of the
operation
3
1,5
1,3
2,3
Press Operations to be
programmed
H
, x, X,
M
, m,
.
, >
Performs the operation
of the button.
The input
button for more
than 1 second Switches inputs.
MACRO 1 or
MACRO 2 Make a one second
interval. When you want
to make a longer
interval, press MACRO
1 or MACRO 2
repeatedly.
continued