Sony STR-DA3300ES - Manuel (Page 115)

115 GB
O
the
r O
p
erati
ons
Selecting channels from a
category (CATEGORY TUNING)
1 Press SHIFT, then press XM to select
“XM RADIO,” or press SIRIUS to select
“SIRIUS.”
You can also use INPUT SELECTOR on
the receiver.
2 Press CATEGORY MODE repeatedly
to select “ONE CATEGORY.”
• All Categories: You can select a channel
from all the categories. The initial setting
is “All Categories.”
• One Category: You can select a channel
from one category. “CAT” is displayed on
the display when you set to “ONE
CATEGORY” mode.
3
Press CATEGORY + or CATEGORY –
to select the category you want.
The category is selected and the channel
with the lowest number in the specified
category is selected.
4 Press TUNING + or TUNING – to select
the channel.
You can also press TUNING MODE on the
receiver to select “AUTO,” then turn
TUNING to select the channel.
Selecting a channel number
directly (Direct tuning)
1
After selecting satellite tuner, press
D.TUNING.
2 Press the numeric buttons to enter the
channel number, then press
to
enter.
Displaying the satellite tuner
information
Press DISPLAY repeatedly.
Each time you press DISPLAY while tuning in
the channel, the display changes cyclically as
follows:
Channel name t Channel number t
Category t Artist name t Song title t
Composer name (SIRIUS only) t Sound
field type
1
Select a channel you want to
preset.
For details on this operation, refer to
“Selecting channels from a category
(CATEGORY TUNING).”
2
Press MEMORY.
3
Press PRESET + or PRESET –
to select a preset number.
You can also select the number by
pressing the numeric buttons. Preset
numbers from 1 to 30 are available.
Channel 1 is preset for the preset numbers
when you purchase the receiver.
4
Press ENTER.
5
Repeat steps 1 to 4 to preset
another station.
Selecting a preset channel
1
Press SHIFT, then press XM to select
“XM RADIO,” or press SIRIUS to select
“SIRIUS.”
2 Press PRESET + or PRESET –
repeatedly to select the preset station
you want.
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
You can also press TUNING MODE on the
receiver repeatedly to select “PRESET”
then use TUNING to select the preset
stations you want.
Presetting satellite tuner
channels