GE ZDIS150ZSS - Manuel (Page 12)

Installation Instructions for ZPK2
12
‡
BEFORE YOU BEGIN:
Read these instructions completely and carefully.
‡
IMPORTANT:
Save these instructions for local inspector’s use.
‡
IMPORTANT:
Observe all governing codes and ordinances.
‡ 1RWHWR,QVWDOOHU²Be sure to leave these
instructions with the Consumer.
‡ 1RWHWR&RQVXPHU²Keep these instructions
with your Owner’s Manual for future reference.
NOTE:
‡ This auxiliary drain pump is designed to pump
water to a maximum height of 10 feet and a
maximum horizontal distance of 100 feet.
‡ To minimize condensation on the drain tube,
insulate the full length of the tube from the pump
to the drain.
WARNING:
Disconnect electrical power supply to ice maker
before installing pump. Failure to do so can result
in death, fire, or electrical shock. Replace all panels
before operating.
AVERTISSEMENT :
Débranchez l’alimentation électrique à la machine
à glaçons avant d’installer la pompe. L’omission de
prendre cette précaution peut entraîner la mort,
l’incendie ou le choc électrique. Replacez tous les
panneaux avant l’utilisation.
KIT CONTENTS:
‡$X[LOLDU\GUDLQSXPS
‡'UDLQWXEHµ,'[µ ELQWRSXPSUHVHUYRLU
inlet)
‡'UDLQWXEHµ,'[· SXPSFKHFNYDOYHWRKRXVH
drain)
‡9HQWWXEHµ,'[µ SXPSUHVHUYRLUYHQWWR
cabinet back)
‡FDEOHFODPSV VHFXUHVYHQWWXEHWREDFNRI
product)
‡VFUHZV[µ VHFXUHVSXPSWREDVHSODWH
and clamps to back of ice maker)
‡6PDOOKRVHFODPSµ VHFXUHVYHQWDQGGUDLQWXEH
to pump)
‡ODUJHDGMXVWDEOHKRVHFODPSVµ VHFXUHGUDLQ
tube to bin and auxiliary drain pump reservoir inlet)
secure hose drain to pump
‡UHDUFRYHUV
‡,QVWDOODWLRQ,QVWUXFWLRQ6KHHW
‡]LSWLH