GE JV936DSS - Manuel (Page 18)

Troubleshooting Tips
Save time and money! Review the chart below first and you
may not need to call for service.
Problem Possible Causes What To Do
Fan does not operate A fuse may be blown or a • Replace fuse or reset circuit breaker.
when the switch is on circuit breaker tripped.
The blower connector is loose • Disconnect power to the unit. Remove the filters
or not plugged into its mating and look up at the blower. If the blower connector
connector. plug is loose or you see the connector dangling,
the installer failed to plug it in securely. Although it
is a blind connection, it is easy to plug in. See the
Installation Instructions in this manual for the plug
location and how to plug the connector in.
Fan fails to circulate air Excessively soiled filters. • Remove the filters, clean if necessary and replace
or moves air slower than them. If cleaning and replacing the filters does not
normal correct the problem, call for service.
• Sufficient makeup (replacement) air is required for
exhausting appliances to operate to rating. Check with
local building codes, which may require or strongly advise
the use of makeup air. Visit GEAppliances.com for available
makeup air solutions.
Before you call for service…
18