Delay cook probe, Special features, Delay cook – Bosch HBL8751UC Manuel d'utilisation

Page 16: Probe

Advertising
background image

English 14

Special Features

The special features provide you with additional
conveniences when cooking.

Learn more about these special features in the following
sections:

Delay Cook

Probe

Sabbath Mode

Panel Lock

Delay Cook

The Delay Cook (End Time) feature allows the oven to be
programmed to finish a timed cooking mode at a
predetermined time.

The Delay Cook timer can only be set from Stand-By mode
or while a cooking mode is running.

To set the Delay Cook Time:

1. For double ovens, select the upper or lower oven.
2. Set the cooking mode and temperature.
3. Press the Delay Cook touchpad. The Set Cook Time

screen is displayed.
Enter the desired length of cook time for the mode in
hours:minutes. The maximum cook time that can be
set is 9 hours and 99 minutes. Enter the hours and
minutes using the numeric keypad.

4. Press Enter to accept the cook time entered and to

proceed to the next step, setting the Cook End Time.
The Set End Time screen is displayed.
Enter the End Time in hours and minutes using the
numeric keypad.

5. Press Enter to accept the end time entered.

6. If Delay Cook was set while a cooking mode was

running, the mode turns off until the calculated start
time is reached.

7. Touch Oven Clear/Off to clear the displayed

information.

Note:
--

To change the Cook Time after the oven has been
started, press the Oven Timer touchpad.

--

To cancel Delay Cook and stop the cooking mode,
press the Oven Clear/Off touchpad (for double ovens,
press Upper Clear/Off or Lower Clear/Off).

Probe

The probe measures the internal temperature of the food.
The probe is available for Bake, Roast and all convection
cooking modes except Convection Broil.

Inserting the probe:

Insert the tip of the probe in the middle and thickest part of
the meat. Make sure the probe is not touching fat, bone, or
parts of the oven or the pan.

To use the probe:

1. Insert the probe into the meat as described above.
2. Connect the probe to the oven. If the probe is not

connected to the oven prior to starting Probe mode, an
error tone sounds and the message “INSERT PROBE”
is displayed.

9 CAUTION

To maintain food safety, do not leave food in the
oven for more than one hour before or after cooking.

Advertising
Ce manuel est liée aux produits suivants: