Bosch HBL8751UC - Manuel (Page 12)

English 10
Before Using the Oven for
the First Time
• Oven must be properly installed by a qualified
technician before use.
• Remove all packing materials from inside and outside
the oven.
• While cool, wipe with a clean, damp cloth and dry.
• There may be a slight odor during first uses; this is
normal and will disappear.
• Optimum cooking results depend on proper bakeware
being used.
• Read and understand all safety precautions and Use
and Care Manual information prior to operating.
Operation
About the Appliance
Your new oven combines premium cooking results and
simple operation.
The oven design has been optimized to improve heat
distribution in the oven cavity. The result is even browning,
shorter cooking times and lower energy consumption.
Thanks to the Self-Clean mode, hours of scrubbing into the
darkest corners of the oven is a thing of the past. The oven
burns off soil simply and easily. All that is left to do is to
remove a few ashes from the oven when Self-Clean is
done.
Clear labeling of the touch pads makes operating the oven
very easy. This manual includes all instructions for
operating the oven.
Please call us if you ever have any questions. Our
telephone number is located at the beginning of this
manual. We welcome your comments and suggestions!
Basic Features
Setting the Clock
The oven includes time functions that require the current
time to be set. It is therefore important to set the clock
before beginning to use the oven. The oven cannot be in a
cooking mode to access the clock set mode.
To set the clock:
:
1. The oven must be in Stand-By mode (oven is powered
on, but no cooking mode or timer in operation).
2. To access the clock set mode:
Press the Clock touchpad. The time blinks indicating it
can be edited.
3. Use the numeric keypad to enter the desired time.
Each number pressed is entered at the right and
moving previously entered digits to the left. To set
“12:45 pm”, press 1, 2, 4, 5.
4. When the desired time is entered, set the time by
pressing Enter.
The clock is now set and running.
Panel Lock - Is displayed when the
control panel is locked.
Self Clean - Is displayed when Self
Clean is active.