Installer checklist, Electrical, Operation – Thermador PD304 Manuel d'utilisation

Page 24: Final check list, Gas supply

Advertising
background image

INSTALLER CHECKLIST

ELECTRICAL

❑ Receptacle with correct over-

current protection is provided
for service cord connection.

❑ Proper ground connection.
❑ Proper polarity at receptacle.

OPERATION

❑ All internal packing materials

removed. Check below grates
and grill pans and within
oven(s).

❑ If used on propane gas, verify

that the propane gas supply is
equipped with its own high pres-
sure regulator in addition to the
pressure regulator supplied
with the appliance.

❑ Burner caps properly seated

into burner bases.

❑ Grill components properly

seated (not all models). Refer
to Use & Care Manual for Grill
details.

FINAL CHECK LIST

❑ Placement of unit.
❑ Specified clearances main-

tained to cabinet surfaces.

❑ Unit Level – front to back –

side to side.

❑ Burner caps positioned prop-

erly on sealed burner bases.

❑ All packaging material removed.
❑ Island trim or backguard at-

tached (if horizontal clearance
to combustible materials be-
hind cooking surface is less
than 12").

❑ Check door adjustment and

hold down brackets.

❑ Kick panel in place and two (2)

screws secure.

❑ The griddle plate and frame is

correctly positioned, tilted
slightly forward. (See page 10
for adjustment procedure.)

GAS SUPPLY

❑ Connection: 3/4" N.P.T. with

a minimum 3/4" diameter
flex line.

❑ The appliance is connected only

to the type of gas for which it is
certified for use.

❑ Manual gas shut off valve in-

stalled in an accessible loca-
tion (without requiring removal
of range).

❑ Unit tested and free of gas leaks.
❑ Gas supply pressure does not

exceed 14" W.C. (34.9 mb)

❑ Bezels centered on burner

knobs, and knobs turn freely.

❑ Each burner lights satisfacto-

rily, both individually and with
other burners operating.

❑ Air Shutter adjustment for

proper flame made for Grill.
See Step 9 and Fig.17.

❑ Griddle is tilted slightly forward

and does not rock (not all mod-
els).

❑ Oven door hinges seated and

hinge locks in proper position.
Door opens and closes prop-
erly.

❑ Burner grates correctly posi-

tioned, level, and do not rock.

20

Advertising