Onkyo AV RECEIVER HT-R990 - Manuel (Page 44)

44
En
Speaker Configuration
Note
• These settings are not available in either of the following cases:
– a pair of headphones is connected.
– the “Audio TV Out” setting is set to “On” (
➔ page 55).
– “HDMI Control(RIHD)” is set to “On” ( ➔ page 54) and
you’re listening through your TV speakers.
■
Subwoofer, Center, Surround, Surround
Back
*1*2*3
`
Yes
`
No
■
Front High *1*2*4
`
Yes
`
No
Note
*1 If the “Surround” setting is set to “No”, this setting cannot be
selected.
*2 If the “Powered Zone 2” setting is set to “Yes”, this setting
cannot be selected.
*3 If the “Front High” setting is set to “Yes”, this setting is
automatically set to “No”.
*4 If the “Surround Back” setting is set to “Yes”, this setting is
automatically set to “No”.
■ Surround Back Ch
`
1ch:
Select if only one surround back speaker L is
connected.
`
2ch:
Select if two (left and right) surround back speakers
are connected.
Note
• If the “Surround Back” Setting is set to “No”, this setting
cannot be selected.
■
Wireless Front High, Wireless Surround Back,
Wireless Subwoofer
`
Yes:
The audio is output from the speakers connected to
the wireless unit.
`
No:
The audio is not output from the speakers connected
to the wireless unit.
When the wireless unit is connected to the UNIVERSAL
PORT jack on the AV receiver, you can select if you wish
to output the audio from the speakers connected to the
wireless unit.
Note
• If the “Front High” setting is set to “No”, “Wireless Front
High” cannot be selected.
• If the “Surround Back” setting is set to “No”, “Wireless
Surround Back” cannot be selected.
• If the “Subwoofer” setting is set to “No”, “Wireless
Subwoofer” cannot be selected.
Speaker Distance
Here you can specify the distance from each speaker to the
listening position so that the sound from each speaker
arrives at the listener’s ears as the sound designer
intended.
■
Unit
`
feet:
Distances can be set in feet. Range: 1.0ft to 30.0ft in
1 foot steps.
`
meters:
Distances can be set in meters. Range: 0.30m to
9.00m in 0.3 meter steps.
(The default setting varies from country to country.)
■
Left, Front High Left, Center, Front High Right,
Right, Surround Right, Surround Back Right,
Surround Back Left, Surround Left, Subwoofer
`
Specify the distance from each speaker to your
listening position.
Note
• These settings are not available in either of the following cases:
– a pair of headphones is connected.
– the “Audio TV Out” setting is set to “On” (
➔ page 55).
– “HDMI Control(RIHD)” is set to “On” (
➔
page 54) and
you’re listening through your TV speakers.
• Speakers that you set to “No” in the “Speaker Configuration”
cannot be selected.
Speaker configuration settings only need to be
changed if you are not using all of the speakers in this
package.
When an optional unit is connected to the
UNIVERSAL PORT jack on the AV receiver, the
speaker setting menu may appear on screen.
This setting is set automatically by Audyssey 2EQ
Room Correction and Speaker Setup (
➔
page 30).