Onkyo AV RECEIVER HT-R990 - Manuel (Page 41)

41
En
Advanced Operations
Advanced Setup
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver’s
various settings. Settings are organized into 9 categories
on the main menu.
Carry out the settings by using the on-screen display.
Note
• This procedure can also be performed on the AV receiver by
using SETUP, the arrow buttons, and ENTER.
• During Audyssey 2EQ ® Room Correction and Speaker Setup,
messages and alike that are displayed on the TV screen will
appear on the display.
Explanatory Notes
The on-screen setup menus appear only on a TV that
is connected to the
HDMI OUT. If your TV is
connected to other video outputs, use the AV
receiver’s display when changing settings.
This section describes the procedure for using the
remote controller unless otherwise specified.
On-screen Setup Menus
Input/Output Assign
(
➔
page 42)
Miscellaneous
(
➔
page 53)
Speaker Setup
(
➔ page 43)
Hardware Setup
(
➔ page 54)
Audio Adjust
(
➔
page 47)
Remote Controller
Setup (
➔
page 64)
Source Setup
(
➔
page 48)
Lock Setup
(
➔
page 57)
Listening Mode Preset
(
➔
page 53)
MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
1. Input/Output Assign
1. Volume Setup
2. OSD Setup
6. Miscellaneous
1. Speaker Settings
2. Speaker Configuration
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
2. Speaker Setup
1. Remote ID
2. Tuner
3. HDMI
4. Auto
Standby
5. Network
6. Firmware
Update
7. Hardware Setup
1. Multiplex/Mono
2. Dolby
3. DTS
4. Theater-Dimensional
5. LFE
Level
3. Audio Adjust
1. Remote Mode Setup
8. Remote Controller Setup
1. Audyssey
2. IntelliVolume
3. A/V
Sync
4. Name Edit
5. Picture Adjust
6. Audio Selector
4. Source Setup
Setup
9. Lock Setup
1. BD/DVD
2. VCR/DVR
3. CBL/SAT
4. GAME
5. AUX
5. Listening Mode Preset
Common Procedures in Setup Menu
1 Press RECEIVER followed by SETUP.
Tip
• If the main menu doesn’t appear, make sure the appropriate
external input is selected on your TV.
2 Use / to select a menu, and then press ENTER.
3 Use / to select a target, and then press ENTER.
4 Use / to select an option, and use / to change
the setting.
Press SETUP to close the menu.
Press RETURN to return to the previous menu.
RETURN SETUP
RECEIVER
ENTER
/ / /
Remote indicator
Menu selection
Setting target
Setting options (default setting underlined)
Main Menu Speaker Configuration
■
Subwoofer
`
Yes
`
No