Connecting the av receiver, Connecting your speakers – Onkyo 29400021 Manuel d'utilisation

Page 18

Advertising
background image

18

Connecting the AV receiver

Speaker Configuration

For 7.1-channel surround-sound playback, you need seven speakers and a powered subwoofer.
The following table indicates the channels you should use depending on the number of speakers that you have.

*

If you’re using only one surround back speaker, connect it to the SURR BACK/ZONE 2 L terminals.

No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and solid bass.
To get the best from your surround sound system, you need to set the speaker settings. You can do this automatically
(see page 54) or manually (see page 85).

Note:
Front high, surround back and front wide speakers produce no sound at the same time.

Attaching the Speaker Labels

The AV receiver’s positive (+) speaker terminals are all
red (the negative (–) speaker terminals are all black).

The supplied speaker cable labels are also color-coded
and you should attach them to the positive (+) side of
each speaker cable in accordance with the above table.
Then all you need to do is to match the color of each
label to the corresponding speaker terminal.

(North American, Taiwan, Australian and Asian mod-
els)

• If you are using banana plugs, tighten the speaker ter-

minal before inserting the banana plug.

• Do not insert the speaker code directly into the center

hole of the speaker terminal.

Connecting a Powered Subwoofer

Using a suitable cable, connect the AV receiver’s PRE
OUT: SUBWOOFER to an input on your powered sub-
woofer, as shown. If your subwoofer is unpowered and
you’re using an external amplifier, connect the PRE
OUT: SUBWOOFER to an input on the amp.
You can connect the powered subwoofer with two PRE-
OUT: SUBWOOFER jacks respectively.
The same signal is output from each jack.

Connecting Your Speakers

Number of speakers:

2

3

4

5

6

7

7

7

8

8

9

9

9

10

11

Front left

Front right

Center

Surround left

Surround right

Surround back*

Surround back left

Surround back right

Front high left

Front high right

Front wide left

Front wide right

Speaker

Color

Front left, Zone 2 left

White

Front right, Zone 2 right

Red

Center

Green

Surround left, Zone 3 left

Blue

Surround right, Zone 3 right

Gray

Surround back left, Zone 2 left

Brown

Surround back right, Zone 2 right

Tan

Front high left

White

Front high right

Red

Front wide left

White

Front wide right

Red

LINE INPUT

LINE INPUT

LINE INPUT

LINE INPUT

Powered subwoofer

TX-NR807_En.book Page 18 Tuesday, July 28, 2009 12:00 PM

Advertising
Ce manuel est liée aux produits suivants: