RCA 21028 - Manuel (Page 20)

20
L
ANGUAGE
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CID/VOL ( or ) button to scroll to HANDSET SETUP.
4. Press MUTE/PROG button to confirm.
5. Press the CID/VOL ( or ) button to scroll to the SET LANGUAGE menu.
6. Press MUTE/PROG button to enter the menu. SET LANGUAGE 1ENG
2FRA 3ESP shows in the display.
7. Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP or
use the CID/VOL ( or ) button to scroll to the desired language.
English is the default setting.
8. Press the MUTE/PROG button to save your selection. You will hear a
confirmation tone and the selected language shows in the display.
H
ANDSET
N
AME
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CID/VOL ( or ) button to scroll to HANDSET SETUP.
4. Press MUTE/PROG button to confirm.
5. Press the CID/VOL ( or ) button to scroll to the HANDSET NAME menu.
6. Press MUTE/PROG button to enter the menu. HANDSET NAME shows in
the display.
7. Use the touch-tone pad to enter a name (up to 15 characters). More than
one letter is stored in each of the number keys. For example, to enter
Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times
for the letter I. Press the 5 key 3 times for the letter L. Wait for 1 second,
press the 5 key 3 times for the second letter L, and press the 1 key to
insert a space between the first and last name. Press the 7 key 4 times
for the letter S; press the 6 key once for the letter M; press the 4 key 3
times for the letter I. Press the 8 key for the letter T; press the 4 key twice
for the letter H.