John Deere AC2-8E Manuel d'utilisation

Page 11

Advertising
background image

Portable Electric Air Compressor Manual

11

AIR TANK PRESSURE GAUGE: The air tank pressure gauge indicates the reserve

air pressure in the air tank (s).
PRESSURE REGULATOR: The air pressure coming from the air tank is controlled by

the regulator knob. Turn the pressure regulation knob clockwise to increase discharge

pressure, and counterclockwise to decrease discharge pressure.
OUTLET PRESSURE GAUGE: The outlet pressure gauge indicates the air pressure

available at the outlet side of the regulator. This pressure is controlled by the regulator

and is always less or equal to the air tank pressure.

AIR COMPRESSOR PUMP: A two stage compressor pump uses two different size

cylinders with the intake valve of the second smaller cylinder linked to the exhaust valve

of the first larger cylinder. On the down stroke of the large cylinder, air is drawn through

the intake valve while the exhaust valve remains closed. On the upstroke, air is com-

pressed, the intake valve closes and compressed air is forced out through the exhaust

valve, into the inter cooler and through the intake valve of the second smaller cylinder

on its down stroke. On the upstroke of the smaller cylinder, the intake valve closes and

the compressed air is compressed a second time and forced out the exhaust valve into

the discharge line, through the tank check valve and into the air tank.

EXPLODED VIEW & EXPLANATION OF AIR COMPRESSOR FEATURES

AIR INTAKE FILTER: This filter is designed to clean air coming into the pump. To

ensure the pump continually receives a clean, cool, dry air supply this filter must always

be clean and ventilation opening free from obstructions. Replace filter element when

necessary.

SAFETY RELIEF VALVE: This valve is designed to prevent system failures by reliev-

ing pressure from the system when the compressed air reaches a predetermined level.

The valve is preset by the manufacturer and must not be modified in any way. To verify

the valve is working properly, pull on the ring. Air pressure should escape. When the

ring is released, it will reset.

MOTOR/PRESSURE SWITCH: This switch is used to start or stop the air compressor.

Moving the switch to the "Auto" (On) position will provide automatic power to the pres-

sure switch which will allow the motor to start when the air tank pressure is below the

factory set "cut-in" pressure. When in the Start/Stop Option, the pressure switch stops

the motor when the air tank pressure reaches the factor set "cut-out" pressure. For

safety purposes, this switch also has a pressure release valve located on the side of the

switch designed to automatically release compressed air from the air compressor pump

head and its discharge line when the air compressor reaches "cut-out" pressure or is

shut off. This allows the motor to restart freely. Moving the switch to the "Off" position

will remove power from the pressure switch and stop the air compressor.

AIR TANK DRAIN VALVE: The drain valve is used to remove moisture from the air

tank(s) after the air compressor is shut off.

NEVER attempt to open the drain valve

when more than 10 PSI of air pressure is in the air tank! To open the drain valve,

turn the knob counterclockwise.

MOTOR THERMAL OVERLOAD: The electric motor has a manual thermal overload

protector. If the motor overheats for any reason, the thermal overload will cut off power,

thus preventing the motor from being damaged. Wait until the motor is cool before

pressing the thermal overload button to reset and begin working again.

OIL FILL PORT/VENT: Pour oil into the Oil Fill Port/Vent when required.

OIL SIGHT GLASS: The Oil Sight Glass displays the oil level in the pump. The oil

level should be at the center of the Oil Sight Glass. If low, add SAE 30W non-detergent

oil.

PILOT VALVE OPTION: When the adjusting knob is turned completely clockwise to

the fully closed position, the air compressor operates in the Start/Stop position. When

the adjusting knob is turned completely counterclockwise to the fully open position, the

air compressor operates in the constant run position.

Advertising
Ce manuel est liée aux produits suivants: