Motorola C51 Series - Manuel (Page 38)

SD7505 User Guide
28
You are using Automatic Bluetooth connection with multiple mobile devices, and
having difficulty switching the SD7505 connection between the devices.
•
In Automatic connections, your SD7505 is always looking to connect with the last
device to which it was connected. As a result, it may be difficult to “sneak in” with
another device and request a connection. If you plan to regularly switch between
multiple mobile devices, consider using Manual Bluetooth connections.
You tried to put the SD7505 in Bluetooth pairing mode (by pressing and holding the
Bluetooth Button), but it connected to a mobile device instead.
•
When set for Manual Bluetooth connections, a short press of the Bluetooth Button
attempts a connection to the mobile device to which the SD7505 was last connected.
If that mobile device is available and in range, that connection will be established prior
to the SD7505 going into pairing mode. Try temporarily turning off the last-connected
mobile device, or turning off the Bluetooth feature of that device, in order to pair a
new mobile device to the SD7505.
You tried to make a call through the SD7505, but got the message “Call Failed: No
Line Exists.”
•
Make sure that a Bluetooth connection exists between the SD7505 and the mobile
device. The Bluetooth LED should blink every 3 seconds.
•
Make sure that the mode switch is in the left position (marked by the Bluetooth logo).